- 22 Dec
How to fix Error 6C10 Canon Printer?
Canon Printer when faces technical error you need to look up for support. To fix Error 6C10 Canon Printer that appeared on following MP110,MP550, MP560, MP540, MP600, MP610, MP630, MP800, MP810, MP830, MP970, MP980, MP620, MP640, IP3600, MP990, MG5200, MG5300, MG6100, MG6200, MG8100, MG8200 models of Canon Printer. The error code is called as CAM sensor error. As out of blue the error has arrived when you pressed the button ON green light flashes. After a time both the resume button and On button flashes alternately. No amount of un and replugging the power and USB cables makes any difference. Drivers need to be reinstalled.
Error 6C10 on Canon Printer has been variously described as either a “Reset Canon Printer ink absorber” error or a “Valve Cam Sensor” error. Some of the user doesn’tknow as well where the valve cam sensor is located therefore you require tech expert’s assistance to locate the sensor. It is said the sensor could be blocked by paper debris but technicians have the way of letting you know the exact location.
The Canon printer was bought new, has had relatively little use and mainly serves to print CDs/DVDs.
There is also a foam strip running almost the full width inside the printer and seems like 95% is clean. Non tech user cannot recognize that’s the “ink absorber” hence you need expert guidance to locate it.There is a button-push sequence designed to place the iP4600 into service mode as well where you can reset the ink absorber but so far this has been done nothing.
Follow Steps to Fix Error 6C10 on Canon Printer:
Step 1: You need to move the print head to the center.
Step 2: Disconnect the printer and check on the right: is the purge unit ok ? No peace of paper ?
Step 1: Do a reset of the printer:
Step 2: Power on
Step 3: Hold down the “Resume” button (triangle in a circle) for 15 to 20 seconds.
Step 1: Switch off the printer.
Step 2:Open the door.
Step 3: Power on.
Step 4: When the cartridge is in the center, close the door.
Related Blog: How to Fix Canon Printer Error 5C20?
Step 1: you need to open the lid and allow the ink cartridge carrier to center itself.
Step 2: Looking to the right, you will see a row of white rollers behind the carrier.
Step 3: At the end of the rollers there is a small, clear piece of plastic that sticks up. Take a small piece of a paper towel and wipe all of the ink off this piece of plastic. As or when cleaned move on to the ink pad.
Step 4: Near about 1 inch, towards the printer front from that piece of the plastic, is a small square, which is about 1/2 inch per side that is a small foam pad. This is where the excess ink is collected.
Step 5: Take small piece of paper towel and press into the foam. Repeat this until the paper towel is no longer collecting the ink. Close the lid, turn off the printer and then turn it back on.
Communicate with Canon Customer Support Number UK to fix Error 6C10 Canon Printer
When you are failing in understanding the problem and blog steps you can connect to technicians. TO connect with our qualified, skilled, capable and experienced tech experts you need to call on Canon Customer Support Number +44-800-404-9735 UK any hour of day and night. Our tech engineers are available 24*7 to assist you around the clock. You can also communicate with technicians via dropping an email to customer support email id address or can have live chat with tech professional from anywhere as per your requirement and needs.
About the Author